What gets tracked
One Sure account is created per asset, per address, per network. A wallet holding ETH and USDC on Ethereum becomes two accounts, both crypto accounts with the wallet subtype. For each asset Sure records:- The quantity held, read from the chain
- A holding valued at the current price, or at zero when no price is available
- The transfers in and out, as investment trades when the price for that day is known, so cost basis and the value chart reconstruct back to acquisition. When that day’s price is not known, the transfer still appears as an excluded, zero-amount entry — and it is upgraded to a trade on the first sync after the price becomes available
Prices need two settings, not one
On-chain data sources report quantities, not values. Prices come from Sure’s market data providers, and the only provider that can quote bare crypto symbols is Binance public (keyless). If no crypto-capable market data provider is enabled, every on-chain wallet is tracked by quantity and valued at zero. This is the most common support report for this feature, and it is a settings issue rather than a sync failure. The settings panel and the linking modal both warn you before you link anything. On a self-hosted instance an admin can fix it from the warning itself with Enable crypto prices — that addsbinance_public to the enabled providers and leaves the others alone. Otherwise, enable it under Settings → Self-hosting → Market data providers, or set SECURITIES_PROVIDERS to a comma-separated list that includes binance_public.
Exchange rates for non-USD families
The crypto provider quotes in USD, so valuing a wallet in any other family currency needs an exchange rate. Sure’s default exchange rate provider (twelve_data) requires an API key. With no key and a non-USD family, there is no FX at all and every on-chain wallet is valued at zero for that separate reason.
Set EXCHANGE_RATE_PROVIDER (or Settings → Self-hosting) to a provider you can use; frankfurter needs no API key. The linking UI warns about this gap specifically, naming your currency. A USD family never sees the warning because it needs no conversion.
When an asset ends up valued at zero for either reason, it is recorded in Settings → Debug logs under the onchain_wallet provider, with the reasons listed.
Linking a wallet
Go to Settings → Providers → On-chain wallets → Add wallet.1
Paste the public address
Leave the network on Detect automatically unless you know which one you want.
2
Confirm the network
If the address format belongs to several networks — every
0x address is valid on all six EVM networks, and Bitcoin’s Base58 shape overlaps Solana’s — Sure probes each and asks you to choose, marking the ones where it found activity.3
Choose what to track
The native coin and assets the data source treats as notable are pre-ticked. Notable means a priced holding worth more than a dollar on EVM networks, or a place on Solana’s verified token list. On a heavily airdropped address this is the difference between a handful of pre-ticked assets and two hundred. You can still track anything listed; unpriceable assets show a quantity and a value of zero.Nothing is imported that you did not tick.
Managing a wallet
Go to Settings → Providers → On-chain wallets → Manage wallets.
Disconnecting never deletes an account. The provider link is removed, holdings are detached, and what you can see stays as a manual account that no longer updates. Delete the account itself if you want it gone.
An address can only be tracked once per network. To change which assets are tracked, use Review tokens rather than adding the address again.
Data sources
Every override expects the base URL of a compatible instance, without a trailing slash — useful if you run your own indexer or node, or if a public endpoint rate-limits you.
Optional Etherscan key
Ethereum, and only Ethereum, can be read through Etherscan instead of Blockscout. A key buys nothing except a higher rate limit. Add it under Settings → Providers → On-chain wallets → Advanced; it is stored encrypted, per family. A key only moves transfer history onto Etherscan. Balances and network detection always come from the keyless indexer, because Etherscan has no free endpoint that lists an address’s tokens. Leave the field empty unless you are being rate-limited.Rate limits and request cost
All the default endpoints are free and shared, so they throttle. Per sync, per address, the cost is roughly:
History is capped at 10 pages per source by default. Wallets with more history than that keep their current balance correct — balances come from an address summary, never from history — but their oldest transfers are not imported.
Raise the cap with
ONCHAIN_HISTORY_MAX_PAGES (default 10, maximum 200); the Solana budget scales with it proportionally.
History is best effort; balances are not. If a source refuses or times out on paginated history, the balances are still recorded and the history is marked incomplete. When a cap is hit, the affected address says so in Manage wallets, and the event is recorded in Settings → Debug logs under the onchain_wallet provider.
Token cap per address
Real addresses are airdrop dumping grounds: a well-known Ethereum address holds close to 8,000 ERC-20 tokens. One read surfaces at most 200 tokens per address, settable withONCHAIN_MAX_TOKENS_PER_ADDRESS (maximum 5,000).
The native coin is never affected, and anything already tracked keeps syncing regardless. On EVM networks the tokens kept are ranked by market cap, so real assets survive the cap and airdrops fall off the end. On Solana the order is by mint address — arbitrary, but identical between syncs, which stops the cap from reshuffling a wallet every night.
Limitations
Only tokens the crypto price provider quotes get a value, and it quotes by symbol. Valuation goes through aCRYPTO:<SYMBOL> ticker, and a symbol is not a token’s identity — its contract is. In practice the provider covers major assets and little else: measured on a real Ethereum address, of its ten largest token positions it quoted two. The other eight — including holdings worth roughly 141,000, and $74,000 — showed a value of zero while their quantities were tracked correctly.
A zero next to a token you know is worth something almost always means the provider does not list that token, not that the balance is wrong. Check the quantity, which is read straight from the chain. Native coins (BTC, ETH, SOL, POL, XDAI) and large-cap tokens are the well-covered case.
DeFi positions are not seen at all. Staked ETH, liquidity-pool tokens, lending positions, and Solana stake accounts are invisible. Only natively-held coins and fungible tokens sitting at the address are read. A wallet holding most of its value in a staking or lending protocol will report a fraction of it.
Bitcoin is one address at a time. Extended keys (xpub, ypub, zpub) are not supported and are rejected as addresses. Most Bitcoin wallets are HD wallets, where one extended key derives thousands of addresses and change is sent to derived ones. Tracking a single address of such a wallet reports only that address’s balance.
Solana token names depend on a token list. Names come from Jupiter’s token search, and only for mints it reports as verified. An unverified or unknown mint keeps a label built from its mint address and is tracked by quantity only. Names are cached for 24 hours per mint, misses included.
Fees are not itemised. Network fees are included in the net effect of each transfer rather than recorded separately. On Solana, native balance changes below 0.0001 SOL are treated as fees and ignored.
Bridged assets are normalised. USDC.e, USDbC, USDT0, WETH, and similar 1:1-redeemable forms are tracked as their canonical asset, so the same asset held on two networks is one security rather than two.
Prices are daily and USD-quoted. Values are converted into your family currency using Sure’s exchange rates. A transfer whose day has no price becomes a zero-amount excluded entry rather than a trade.
NFTs are not tracked. They are filtered out by token standard, so an NFT is never mistaken for a balance of one fungible token.
Troubleshooting
Every wallet shows a value of zero. Either no crypto-capable market data provider is enabled, or your family currency is not USD and no exchange rate provider is configured. Both are covered above, and the linking UI says which one applies. One token shows zero while the others in the same wallet are fine. The price provider does not quote that token. Pricing is by symbol and covers major assets, so long-tail tokens are tracked by quantity and valued at zero. There is no setting that changes this. A Bitcoin balance is much lower than my wallet app shows. You are tracking one address of an HD wallet. See the Bitcoin limitation above. Sync says the explorer could not be reached. The public endpoint is down, throttling you, or too slow to answer. Retry later, or point the relevant*_URL override at your own instance.
Solana shows balances but no transfers. The free endpoint throttles the history methods; balances are kept and the history is marked incomplete. Set SOLANA_RPC_URL to your own node or a paid endpoint to get the transfers.
A token I received is not showing up. New assets are never imported automatically. Use Review tokens and tick it.
A Solana token shows as SPL:abcd…wxyz. The token list does not vouch for that mint, so Sure will not name or price it. Tick it anyway to track the quantity.
Transfers appear with a value of 0 and are excluded from totals. No price was available for that date yet. Once market data covers the range, the next sync upgrades those entries to trades automatically. If they stay at zero, the date is outside what your market data provider can serve.
Manage wallets says the history is incomplete. The address has more transfers than one sync reads. Balances are unaffected. Raise ONCHAIN_HISTORY_MAX_PAGES if you need the full history and can afford the extra requests.
Balances are correct but nothing updates. Syncs only rewrite an account when the chain actually changed — an idle wallet produces no writes at all. Check Settings → Providers for the last sync time, and Settings → Debug logs filtered to the onchain_wallet provider for recorded failures.